English
Français
Awning Windows
Casement Windows
Wood Doors
Sierra Pacific Patio Sliding Doors create a graceful transition from your indoor to outdoor living areas. While providing the perfect solution for a space-saving opening, these doors also optimize your view and allow your home to fill with warm sunlight.
- Certified and labeled (SFI) Douglas Fir or Ponderosa Pine
- Solid forged brass handles & escutcheon plates
- Multipoint locking mechanism
- Steel ball bearing rollers
- Factory applied drip cap
- Basic jamb width 4 9/16"
- Multitude of glass options
- 3 widths of simulite bar 7/8" - 1 5/16" - 2"
- Ability to mix bar widths
- 4 simulite profiles, Colonial or Contemporary, 5/8" Putty,
- 7/8" Atherton (wood exterior only)
- Sliding screen door
- Engineered fixed panel stiles
- LVL operating panel stiles
Secure and durable as they are beautiful, our Patio Sliding Doors feature a multi-point locking system for optimum security and weather resistance. Our gear mechanism is made from corrosion-resistant 300 Series Stainless Steel and our locking system has passed the most stringent forced entry requirements.
Our doors feature solid brass forged handles and escutcheon plates for strength, durability and a smooth, blemish-free surface. Available in a variety of finishes, our handles and escutcheons complement virtually any design scheme.
Patio sliding door features a thermally efficient, pultruded fiberglass sill in bronze tone with an interior oak stop.
Interior surfaces are unfinished clear wood ready to prep for stain or paint. An optional factory applied interior primer coat is available.
Top and bottom rails are solid material and engineered for strength and stability. The stiles on our operable panels are made of LVL material, while our fixed panels have engineered stiles. Stiles and top rail are 4 5/8". Bottom rails are 6 13/16" wide.
Patio sliding door features a thermally efficient, pultruded fiberglass sill in bronze tone with an interior oak stop.
Warm Edge
In order to overcome the thermal inefficiency of conventional aluminum window spacers, a new type of spacer product called warm edge technology has evolved in the window industry. Warm Edge refers to the type of spacer material used to separate the panes of glass in an insulated window unit. If the material conducts less heat or cold at the edge of the glass than a conventional aluminum spacer, it is said to be "warm-edge." Most of these newer window spacers are less conductive and outperform pure aluminum. But there’s still one small problem -- they all contain some kind of metal. And metal is highly conductive. Unlike other so-called "warm" edge spacers that contain steel or aluminum wrapped in butyl rubber, the Quanex spacer is made of 100% polymer structural foam. The NO-Metal formula conducts less heat and cold than conventional metal spacers and provides the warmest possible edge.
The NO-Metal Warm Edge:
- Assures comfortable humidity levels and reduces worries about condensation and mold
- Resists window condensation
- Reduces energy costs
- Provides long-life durability
- Reduces outside noise transmittance
- Structural thermoset foam spacer reduces the stress on the system therefore reducing stress on the glass which results in less stress cracks and reduces stress on the sealant increasing sealant effectiveness
- Globally tested and proven spacer system
High Performance Double Coat Low-E Insulated Glass
Reduce Heating and Cooling Loads
High performance insulated glass with two low-E coatings blocks more solar heat than ordinary low-E and clear glass. The oppressive heat of the sun is composed of visible light and invisible infrared energy. Insulated glass produced with two low-E coatings allows the daylight to pass through the glass and filters out solar heat. In fact, it blocks a large percentage of the sun's harmful ultraviolet rays and delivers a performance improvement in winter nighttime insulation (R-value) compared to non-coated air-filled insulating glass.
Types of glass
The standard hardware set features a corrosion resistant 300 series stainless steel, multi-point locking mechanism which is engaged by twisting an interior thumb turn. A keyed lock is available as an option. Both interior and exterior handle sets are forged brass for strength and durability and a smooth, blemish free surface.
Note: Colors shown may not be exact due to computer monitor differences. A degree of variation may occur on actual production line coatings. Ask your sales representative for a color sample
An optional offering on patio sliders is the Hoppe Flush Mount Sliding Door Trim. These premium flush pulls are made from high quality bronze base metal. The plates are available in a square design and come in Oil-Rubbed Bronze or Satin Nickel finishes.
Our interior simulite bars are made from clear Ponderosa Pine or Douglas Fir and are available in either Colonial or Contemporary profiles in three widths: 7/8", 1 5/16" or 2". In addition, we offer a 5/8" Putty profile in clad and wood exterior, and a 7/8" Atherton profile in wood exterior only. Insulated units with simulite are standard with an internal shadow bar to give the appearance of authentic divided lites.
missing translation
Standard Fiberglass Cloth
Clad Exterior: Sliding screens are constructed with an extruded aluminum frame finished in colors to match your exterior clad color. Screen is made with charcoal fiberglass cloth (18 x 16 mesh)
Wood Exterior: Sliding screens are constructed with an extruded aluminum frame finished in your choise of white, black, or bronze. Screen is made with charcoal fiberglass cloth (18 x 16 mesh)
BetterVue
BetterVue™ insect screening for windows, doors and porches is an excellent visibility insect screen (eVis) designed to maximize your outward view. BetterVue is woven from small, refined yarns that improve the screen’s openness, making visibility sharper and more brilliant.
UltraVue
UltraVue™ excellent visibility insect screening provides a sharp view of the outdoors while providing more light, air flow and improved indoor air quality.